Jewelry
All prices are subject to change without notice due to change in market cost.
Ring Sizing | up to 3.5mm | 3.6mm-8mm |
Smaller | $50 Up | $60 Up |
Larger | $78 Up | $95 Up |
each additional size | $30 Up | $50 Up |
1/2 shank | $150.00 and up | $175.00 and up |
full shank | $250.00 and up | $300 and up |
sizing bumps | $60/$80/$120 | |
repair break in shank | $40 Up | per break |
solder rings together | $50 Up | |
Clean and Polish | $24.00 and up | |
Satin finish | $50.00 and up | |
Rhodium finish | $50.00 and up | |
Prongs: | ||
Prong Retip | $30 Up | |
each additional tip | $25 Up | |
Full Prong | $60 Up | |
each additional | $50 Up | |
rebuild channel | $18.00 | PER STONE/PER SIDE |
straighten prongs | $10.00 | PER STONE |
New Heads | Including Stone Setting | |
up to .15 | $68.00 Up | $100 up |
.16-.25 | $75.00 Up | $140 up |
.26-.50 | $95.00 Up | $175. up |
.51-.75 | $110.00 Up | $195 up |
.75- 1.00 | $125.00 Up | $225 up |
Tighten stones | $15.00 up | 1st stone |
$10.00 up | Each additional | |
Chain/Brac Repair | $24/$35/$45 | Light/Med/Heavy or Hollow |
Figure 8 catch | $75.00 Up | |
Tennis brac catch | $100.00 and up | |
Tighten clasp | $15.00 | |
New Rivet | $40.00 and up | |
Re-Braid | $10.00 up | PER STRAND |
Jump Rings: | ||
up to 5mm with solder | $30.00 | |
up to 8mm with solder | $50.00 | |
Rabbit ear bail | $60.00 and up | |
End tab | $60.00 and up | |
Lobster claw catches | 14K $60 Up | Sterling $25 Up |
Watches
We specialize in the service of most Swiss Watch Brands. Rolex, Ebel, Baume/Mercier, Omega, Raymond Weil, Concord, Breitling, Tag Heuer, IWC, Longines, Patek Philippe and Rado.
Free Estimates given prior to any work performed
Most non Swiss Watch Batteries:
$12.50 (non water resistant)
$16.00 Lithium
Additional charges for water resistant watches.
Specialty and Swiss watches, batteries start at $29.95
**Expert watch refinishing: Case and Band (Most brands)
Ladies models: Stainless Steel $100.00 // 10k – 14k or 18k $125.00
Mens models: Stainless Steel $125.00 // 10k-14k or 18k $150.00
Leave a Reply
Want to join the discussion?Feel free to contribute!